Cavity Wax – IC410
A high penetrating cavity wax with excellent long term anti-corrosion protection capabilities and lubricating properties.
Excellent long term anti-corrosion capabilities.
High penetration and lubrication.
Adheres to a wide variety of surfaces.
Displaces water where needed.
Application
Shake the can thoroughly before use. Test in an inconspicuous area to check for compatibility. Ensure surfaces to be coated are clean, dry and free from rust. Spray on to the surface from a distance of 20cm – 30cm. Drying time depends on film thickness, humidity and temperature. Ensure a surface substrate temperature of 10-30°C at time of application.
Technical Data
Appearance: Brown.
Odour: Solvent.
Contents: Waxes, viscosity modifiers, stabilisers, hydrocarbon solvents and propane/butane propellant.
Storage: Below 50°C
Flash Point: <0°C
Relative Density: 0.698
Solubility: Insoluble in water.
Additional Information
12 x 400ml cans.